GT series high efficiency steel wire/rod coil straightening/cutting machine
Main composition of the machine：Main straightening cutting machine, discharging device 12m, charging device，protection safety cage, electric control cabinet, spare parts and tools
Specification of the machines:
|
Performance of the machine |
unit |
Machine type |
||||||||||
|
GT3/10 |
GT5/10 |
GT6/12 |
S-GT6/12 |
GT8/14 |
GT12/16 |
|||||||
|
the diameter of rod to be straightened and cut
|
hot rolled coil plain bar HPB |
Dia. mm |
3~10 |
5~10 |
5~12 |
6~12 |
8~14 |
12~16 |
||||
|
HRB335 hot rolled gradeⅡ coil rebar |
Dia. mm |
3~8 |
5~8 |
6~10 |
6~12 |
8~14 |
12~16 |
|||||
|
HRB400 hot rolled grade Ⅲ coil rebar |
Dia. mm |
3~8 |
5~8 |
6~10 |
6~12 |
8~14 |
12~16 |
|||||
|
cold rolled plain bar cold rolled plain rebar |
Dia. mm |
3~10 |
5~10 |
5~12 |
6~12 |
8~14 |
12~16 |
|||||
|
Cutting length |
m |
1~12 (tailor cut as per request) |
||||||||||
|
Straighten/cut speed（adjustable,3speeds） |
m/min |
70-100-130 (when Diameter ≥14mm, speed limit is 100m/min ) |
||||||||||
|
Straightness after straightening/cutting |
mm/m |
≤2 |
||||||||||
|
Cutting precision of cutting |
mm |
≤±1 |
||||||||||
|
Total installation power rating (380V,50Hz, 3 phase) |
Kw |
18.5 +4 |
18.5 +4 |
22 +4 |
30 +4 |
37 +4 |
45 +4 |
|
||||
|
The speed is no more than 100m/min for Dia.14 and above. |
|
|||||||||||
Note: for ocean freight, 1*40’ container is necessary for the two machines.
3. Leading time: be ready for shipment 2 months after ordered.
4. Installing and commissioning: provide Buyer with video file for installing and
commissioning. We shall, if Buyer request, arrange our technicians to to Buyer’s site
to instruct installing and commissioning. For one machine, it takes about 7 to 14 days.
5. Guarantee period : 12 months
6. Buyer shall provide following items:
(1). Electricity power source: 380v, 3 phase, 50Hz
(2). Air compressor: the minimum air supply no less than 0.9m3 per minute for one machine
and the pressure is no less than 0.7MPa. If Buyer need Seller supply the air
compressor at additional cost.
(3). The buyer shall prepare proper plant foundation as per drawing provided by Seller.
7. Other information for transportation
weight of the machine：about 5.5 ton per unit of the machine
dimension and volume list of one machine
（one machine need 1*40’container; however, for two machines, we can manage to load them
into 1*40 container, too ）
|
Item |
Part |
Net weight |
dimension |
volume |
Qty |
remark |
|
1 |
Main straightening cutting machine |
3.1 |
3220*1360*1660 |
7.3 |
1 |
|
|
2 |
discharging device |
1.3 |
6580*1000*2160 |
14.2 |
1 |
total 12.5 length, in two section, stack together |
|
3 |
charging device |
0.6 |
3200*750*1800 |
4.3 |
1 |
Turntable type, 0.355 |
|
4 |
electric control cabin |
0.1 |
900*700*1000 |
0.6 |
1 |
|
|
5 |
protection safety cage |
0.2 |
2000*1100*1160 |
2.6 |
1 |
|
|
6 |
Spare part box |
0.1 |
600*600*600 |
0.2 |
1 |
|
|
7 |
Tool box |
0.1 |
600*600*600 |
0.2 |
1 |
|
|
|
Total |
5.5 |
|
29.4 |
|
|
